What does a structural engineer do?
A structural engineer makes sure a building or structure can carry its loads safely, now and over its life. For new work, the engineer calculates the loads, sizes the footings, slabs, beams and columns, and produces structural drawings for the builder and the certifier. For existing buildings, the engineer inspects cracks, sagging, movement or damage, works out the cause and recommends the repair. Read more in our guide to what a structural engineer does.
What is structural engineering?
Structural engineering is the branch of engineering that works out how a structure carries its own weight, the people and contents inside it, and wind and soil pressure, down to the ground. In Australia, structural design follows the National Construction Code (NCC) and the Australian Standards it calls up. Examples are AS 2870 Residential slabs and footings, which sets how a site is classified and how house slabs and footings are designed, and AS/NZS 1170.2 for wind actions.
When do you need a structural engineer in Sydney?
You need a structural engineer in Sydney when building work changes or adds to the structure of a building, such as a new house, a second storey, removing a load-bearing wall, a deck, a pool or a retaining wall. NSW has three common approval pathways for this kind of work, and the pathway decides what has to be approved before building starts.
A construction certificate confirms that the detailed plans and specifications meet the National Construction Code. The City of Sydney asks for a structural plan with the application when structural work is proposed, such as concrete slabs, footings or steel beams. A structural engineer prepares that plan. Check your pathway on the NSW Planning Portal or with your council before you start.
Does a structural engineer need to be registered in NSW?
A structural engineer must be registered in NSW to do professional engineering work on regulated buildings, which are currently class 2, 3 and 9c buildings (for class 3 and 9c, new buildings), such as apartment buildings, and buildings with a part in those classes. The registration scheme is set up under the Design and Building Practitioners Act 2020 and run by Building Commission NSW.
- A registered design practitioner must prepare the regulated designs for building elements on a regulated building, and issue a design compliance declaration that the design complies with the Building Code of Australia.
- Regulated designs must be lodged on the NSW Planning Portal before the building work they cover can start.
- Work that involves shoring, underpinning or anchoring needs regulated designs from a design practitioner in structural or geotechnical engineering.
- You can check a professional engineer's or design practitioner's registration with the Service NSW online check, by name, licence number, ABN or location.
A detached house is a class 1 building, so this scheme does not currently cover it. The house still needs structural design that meets the NCC when the work is structural.
How do you find a structural engineer near me in Sydney?
To find a structural engineer near you in Sydney, look for one who works in your area on your type of project and can visit the site. Before you book:
- Write down what you need: a design for new work, or an inspection and report on an existing problem.
- Gather your architectural plans, photos and the council or certifier's requests.
- Ask the engineer what you will receive: drawings, calculations, a report or site inspections.
- For apartment buildings, check the engineer's NSW registration online.
Our page on finding a structural engineer near me lists the other areas we cover, and our structural engineer cost guide explains what affects the fee.